If you also like to produce your own music, the included KORE PLAYER offers a wide range of premium sounds for use in any sequencer. KORE PLAYER is a software instrument with six sound engines under the hood. The library contains over 600 MB of tweakable, production-ready sounds. The included KORE SELECTION SOUNDPACK gives you a total of 119 instrument and 16 effect sounds.
More KORE PLAYER info…

• Professional USB 2.0 audio interface with ultra-high 24-bit/96kHz Cirrus Logic® converters


• 2 stereo 1/4" Line/Headphone level outputs


• Manual volume controls for each stereo channel


• Hi-gain outputs based on RC4580 Headphones OP AMP for punchy, loud level
  as also featured on the AUDIO 4 DJ and AUDIO 8 DJ interfaces


• 2 output LEDs (one LED for each stereo channel) for instant visual monitoring of connection status


• USB 2.0 bus powered


• Ultra-low latency ASIO™, Core Audio™, Direct Sound™, WASAPI™ drivers


• Compatible with software platforms VST™, Audio Units™, Stand-alone, RTAS®


• 2 phone-jack (1/4”) to RCA adapter cables (cable length 1 m) and 1 shielded USB cable (approx. 1,5 m) are included in the product box

If you're working with a laptop only, then Output A could be used to route the master signal to the PA, whilst Output B allows you to monitor the next track you're cueing up in your headphones. This is a typical setup for digital-only DJs who use a MIDI controller with TRAKTOR.

When using AUDIO 2 DJ with a mixer the stereo outputs are routed to separate channels on the external mixer using the included adapter cables. Output A connects to Channel 1, Output B to Channel 2. The mixer will now work in exactly the same way as if two turntables or CDJs were connected.

Windows® XP (SP2, 32 bit), Vista (SP1, 32 bit, 64 bit), Pentium or Athlon 1.4 GHz, 1 GB RAM, USB 2.0 port
MAC OS® X 10.4, G4 1.4 GHz or Intel® Core™ Duo 1.66 GHz, 512 MB RAM, USB 2.0 port

3.5"(90 mm) x 2.3" (58 mm) x 0.9"(24 mm)
Weight: 3.2oz (84 grams)

ASIO™, Core Audio™, DirectSound®, WASAPI™

Power Supply Via USB 2.0 interface, 5V 500mA bus power. No additional power supply or battery is needed.

Audio Outputs (D/A)
Channels	4
Sample Rate	44.1, 48, 88.2, 96 kHz
Resolution	24-bit
Converter	Cirrus Logic
Line Outputs
Output Impedance	100 Ohms Unbalanced, 200 Ohms Balanced
Cross Talk	-87 dBu
Maximum Output Level	+9,6 dBu
SNR (weighted)	101 dBu (A-weighted)
THD+N	0,007%
Frequency Response +/- 1 dBu	10 Hz-40 kHz
Headphone Output
Load Impedance	8 Ohms – 600 Ohms
Maximum Output Level (100 Ohm load)	9,3 dBu, 4.26 V rms, 100 mW @ 100 Ohms
SNR (weighted)	95 dBu (A-weighted)
THD+N (100 Ohms)	0,012%
Frequency Response +/- 1 dBu	10 Hz-40 kHz

Native Instruments now boasts a strong range of audio interfaces made specifically for DJs. This table helps you identify the similarities and differerences between the AUDIO 2 DJ, AUDIO 4 DJ and the AUDIO 8 DJ.

* Other sampling rates available are 44.1 KHz, 48 KHz, 88.2 KHz
** 2nd output can be used for headphones
*** Vinyl / CD control is only possible via purchasing a TRAKTOR SCRATCH product (full version, update, crossgrade or upgrade kit). Each one of those products contains a TRAKTOR SCRATCH licence, necessary to enable DVS functionality. It is NOT possible to get DVS functionality by owning TRAKTOR and purchasing an audio interface such as the AUDIO 8 DJ or AUDIO 4 DJ.